APURNA™’s APOGÉE monoblock amplifier collection is our most upscaled and sophisticated line; these authentic jewels of technology and design embody the essence of the APURNA™ brand, audio excellence and differentiating aesthetics.
Their design, without any visible screws, was dictated by strict specifications, imposing aesthetic objectives as ambitious as those exclusively technical.
600 W of available power at 4 ohms, 300 W at 8 ohms, in addition to a pulse power exceeding 4500 W, allow the amplifiers to achieve the ultimate level of sound performance.
Inspired by Haute Horlogerie, their harmonious apparent and proudly showcased mechanism is exquisite.
This exclusive product authorizes bespoke, personalized and interchangeable finishes*, a “haute couture” design reflecting craftmanship and luxury “Made in France”.
The APURNA™’s brand symbol, represented by an ice crystal which is laser engraved into the optical glass as well as its polished stainless-steel bezel adding to its brilliance make this exceptional item truly stand out.
* Subject to feasibility. Additional cost applies for this finish.
Entirely “customisable”, the amplifiers of the APOGÉE collection offer a very wide range of colours as well as material options.
Lacquers can be chosen from the complete RAL colour chart, in matte, gloss or satin finish. Other noble materials such as leather, wood, carbon etc. may be selected either from our catalogue suggestions, or created according to your personal wishes. *
APURNA™’s commitment to sustainable development is among others expressed through providing our clients the possibility of having the aesthetics of the APOGEE amplifiers changed over time.Should your design desires evolve, you may change the look of your amplifiers with new materials and new colours. *
* Subject to feasibility, additional costs apply for fully-customisable finishes as well as for changes.
The various APURNA™ Control Modules* are ergonomic, intuitive and simple to use.
They function via “RF” (radio frequency) connection, controlling the APURNA™ amplifiers remotely, regardless of their orientation.
All Control Modules include volume display by means of the “sources” LEDs and allow to vary or even turn off the optics when the amplifiers are switched on.
The « crystal flower » Control Module features a brilliant-cut faceted crystal top.
These technological masterpieces of an incomparable appeal are delivered inside their dedicated case.
* Only for integrated amplifiers
Model shown with integrated preamp
The connectors on all our amplifiers have been selected for their technical excellence, and are gold-plated.
1 XLR socket in bypass mode
1 RCA socket in bypass mode
TRIGGER In / Out (Link)
2 XLR sockets, with 1 in bypass mode
5 RCA sockets, with 1 in bypass mode
2 WBT-0702.01 terminals with gold plating
600W RMS under 4-ohm
300W RMS under 8-ohm
(compatible with a 1-ohm load with signal musical)
Maximum output current
Maximum pulse power
THD + N (A-Weighting)
0.002% (1Khz 1W)
IMD (60Hz - 7KHz; 4:1; 1W)
DC (0Hz) - 475 Khz (-3dB)
DC (0Hz) - 190 Khz (-0,1dB)
DC (0Hz) - 43 Khz (-0,1dB)
> 480 under an 8-ohm
Signal-to-noise ration (A-Weighting)
> 116 dB
x 1 XLR in Bypass mode
x 1 RCA in Bypass mode
x 1 TRIGGER In / Out (Link)
x 2 XLR with 1 in Bypass mode
x 5 RCA with 1 in Bypass mode
TRIGGER input (+12V)
WBT-0702.01 terminals with gold plating
400 x 400 x 245 mm
Weight (For a standard amplifier)
700 Rue Jean Moulin
07500 GUILHERAND-GRANGES - France
T | +33 (0) 4 75 81 33 71
All rights reserved APURNA™